Leveraging Thermal Simulation in CAD
 
Does your electronics thermal management design provide the adequate cooling capacity to ensure critical component junction temperatures are within limits to avoid failure or impact performance? Is your design energy efficient? How can you achieve the best design within the available time?
 
Attend this presentation to discover how to overcome MCAD and ECAD related design barriers to shorten development using fully CAD-embedded CFD software, Simcenter FLOEFD. By eliminating transfer between MCAD and CFD thermal analysis tools, reducing analysis process overheads, and streamlining workflows for collaboration with EDA design groups - results can be used earlier for better decision making.
 
Join this presentation to discover how to overcome MCAD and ECAD related design barriers to shorten development using Simcenter FLOEFD CAD-embedded CFD software.
 
Electronics thermal design using a CAD Embedded CFD workflow
A thermal management design study will be demonstrated for an electronics product that has both a pumped liquid cooling subsystem for cooling high heat dissipation components and convection air cooling of a PCB control board in a sealed enclosure. There is design consideration of heatsinks, fans cold plates and heat exchangers. In this example, you will learn how to apply CAD-embedded CFD with specific electronics cooling capabilities to evaluate and optimize even the most geometrically complex designs.
 
The study will be performed in NX environment with Simcenter FLOEFD for NX. This will illustrate the approach common to other CAD environment variants for Solid Edge, CATIA or Creo.
 
What you will learn:
 
- Electronics cooling CFD in the CAD environment: geometry handling, automatic meshing, solving to results post-processing
- Appropriate PCB thermal modeling levels – compact through to detailed full copper trace modeling for joule heating analysis
- How to go from EDA imported PCB data to CFD thermal model in minutes
- Chip package modeling fidelity from simple, 2-R, through to 3D CAD-based detailed package thermal model creation
- Optimization and design exploration: how to intelligently explore the design space efficiently and select the best option quickly
 
Further topics will be briefly discussed on package thermal model calibration against measurement data, and supporting both electrothermal modeling and system modeling with reduced-order models.

Hora

13:00 - 14:00 hs GMT+1

Organizador

Compartir
Enviar a un amigo
Mi email *
Email destinatario *
Comentario *
Repite estos números *
Control de seguridad
Septiembre / 2025 404 webinars
Lunes
Martes
Miércoles
Jueves
Viernes
Sábado
Domingo
Lun 01 de Septiembre de 2025
Mar 02 de Septiembre de 2025
Mié 03 de Septiembre de 2025
Jue 04 de Septiembre de 2025
Vie 05 de Septiembre de 2025
Sáb 06 de Septiembre de 2025
Dom 07 de Septiembre de 2025
Lun 08 de Septiembre de 2025
Mar 09 de Septiembre de 2025
Mié 10 de Septiembre de 2025
Jue 11 de Septiembre de 2025
Vie 12 de Septiembre de 2025
Sáb 13 de Septiembre de 2025
Dom 14 de Septiembre de 2025
Lun 15 de Septiembre de 2025
Mar 16 de Septiembre de 2025
Mié 17 de Septiembre de 2025
Jue 18 de Septiembre de 2025
Vie 19 de Septiembre de 2025
Sáb 20 de Septiembre de 2025
Dom 21 de Septiembre de 2025
Lun 22 de Septiembre de 2025
Mar 23 de Septiembre de 2025
Mié 24 de Septiembre de 2025
Jue 25 de Septiembre de 2025
Vie 26 de Septiembre de 2025
Sáb 27 de Septiembre de 2025
Dom 28 de Septiembre de 2025
Lun 29 de Septiembre de 2025
Mar 30 de Septiembre de 2025
Mié 01 de Septiembre de 2025
Jue 02 de Septiembre de 2025
Vie 03 de Septiembre de 2025
Sáb 04 de Septiembre de 2025
Dom 05 de Septiembre de 2025

Publicidad

Lo más leído »

Publicidad

Más Secciones »

Hola Invitado