Design optimization enables efficient use of local resources
 
The quality of coal resources globally is deteriorating, and the existing technology used to extract energy from coal for industrial and utility use suffers from problems which result in a drop in efficiency and an increase in plant maintenance costs. In this webinar, you'll learn about a simulation-based tool that was developed to establish a foundation for future design optimization to make economic and environmentally responsible use of poor quality coal. This holistic tool consists of an integrated thermal and CFD model representing a large coal combustion system that was built up from various sub-components in order to analyze the complex interaction between them. For example, the tool was used to examine the air and coal distribution, which are fundamental to efficient combustion and reducing emissions like dust, NOx and SOx.
 
A validated, integrated digital twin of coal mill subcomponents
 
The pilot project for this toolset involved a detailed investigation of the characteristics of a utility scale coal-fired boiler system utilizing different coal qualities and operating under various real-life conditions. The simulation models representing several coal mill subcomponents were integrated to investigate the complex interconnectivity between all parts of the combustion system. This approach mitigates the risks associated with unrealistic or oversimplified assumptions regarding boundary conditions.
 
Robust models created from similar projects may be the foundation for the development of “digital twins” of the existing installed equipment.
 
What you will learn in this webinar:
 
This webinar will give an overview of the toolset and how Simcenter was used to model the various subcomponents that included the following:
 
- Pulverizer/mill
- Coal dust (pulverized fuel) distribution system
- Combustion air distribution system
- Detailed burners
- Furnace (where the combustion and radiant heat transfer occurs)
- Boiler and convective heat transfer surfaces
- Air heater
 
Presenters:
 
Ignus le Roux, Director, Engineering Services, Aerotherm
Warwick Ham, Boiler Process Group Leader, Steinmüller Africa
Ravi Aglave, PhD, Director, Energy & Process Industries at Siemens Digital Industries Software

Hora

11:00 - 12:00 hs GMT+1

Organizador

Compartir
Enviar a un amigo
Mi email *
Email destinatario *
Comentario *
Repite estos números *
Control de seguridad
Noviembre / 2025 309 webinars
Lunes
Martes
Miércoles
Jueves
Viernes
Sábado
Domingo
Lun 27 de Noviembre de 2025
Mar 28 de Noviembre de 2025
Mié 29 de Noviembre de 2025
Jue 30 de Noviembre de 2025
Vie 31 de Noviembre de 2025
Sáb 01 de Noviembre de 2025
Dom 02 de Noviembre de 2025
Lun 03 de Noviembre de 2025
Mar 04 de Noviembre de 2025
Mié 05 de Noviembre de 2025
Jue 06 de Noviembre de 2025
Vie 07 de Noviembre de 2025
Sáb 08 de Noviembre de 2025
Dom 09 de Noviembre de 2025
Lun 10 de Noviembre de 2025
Mar 11 de Noviembre de 2025
Mié 12 de Noviembre de 2025
Jue 13 de Noviembre de 2025
Vie 14 de Noviembre de 2025
Sáb 15 de Noviembre de 2025
Dom 16 de Noviembre de 2025
Lun 17 de Noviembre de 2025
Mar 18 de Noviembre de 2025
Mié 19 de Noviembre de 2025
Jue 20 de Noviembre de 2025
Vie 21 de Noviembre de 2025
Sáb 22 de Noviembre de 2025
Dom 23 de Noviembre de 2025
Lun 24 de Noviembre de 2025
Mar 25 de Noviembre de 2025
Mié 26 de Noviembre de 2025
Jue 27 de Noviembre de 2025
Vie 28 de Noviembre de 2025
Sáb 29 de Noviembre de 2025
Dom 30 de Noviembre de 2025

Publicidad

Lo más leído »

Publicidad

Más Secciones »

Hola Invitado