In this webinar, hear how Siemens Energy use Simcenter to perform hot to cold conversion in a single analysis step.
Learn more on their validation methods and confidence in the results.Efficient blade shapes are key to designing efficient turbines. Compressor blade geometry is first defined for the operating, hot shape. This must be reverse engineered to the cold blade shape before manufacturing, which often requires an iterative finite element approach. In this webinar, hear how Siemens Energy use Simcenter to perform hot to cold conversion in a single analysis step. This approach is up to five times quicker than a standard iterative method, with the same level of accuracy.
 
Learn more on our hot to cold deformation and blade durability solutions
 
You will learn:
 
- How Siemens Energy perform hot to cold deformation analysis in a single step
- Why a close-coupled connection between CAD and simulation data speeds up deformation analysis and increases productivity
- Validation of stress and model analysis results against other solvers
 
Determine blade manufacturing shape and applied loads
 
One of the key design criteria for engine blades is that they are able to perform a certain number of design cycles without failing due to stress fatigue. In this webinar hear how Siemens Energy use Simcenter solutions to identify the high stress regions and engine loads. They also share results from validation studies for their mechanical stress model. 
 
Hear from an expert from Siemens Energy
 
Simon Jackson:Principal Analytical Engineer , Siemens Energy Industrial Turbomachinery Ltd, UK
 
Simon Jackson is a Principal Analytical Engineer for mechanical integrity at Siemens Energy Industrial Turbomachinery Ltd, UK. He received his Bachelor of Engineering degree in Mechanical Engineering in 1990 from Staffordshire University and since then has been working at the gas turbine facility in Lincoln, firstly on package design and the past 20 years on stress, life and vibration analysis of compressor/turbine blades and discs. He is an Associate member of the IMechE.

Hora

11:00 - 12:00 hs GMT+1

Organizador

Compartir
Enviar a un amigo
Mi email *
Email destinatario *
Comentario *
Repite estos números *
Control de seguridad
Mayo / 2025 302 webinars
Lunes
Martes
Miércoles
Jueves
Viernes
Sábado
Domingo
Lun 28 de Mayo de 2025
Mar 29 de Mayo de 2025
Mié 30 de Mayo de 2025
Jue 01 de Mayo de 2025
Vie 02 de Mayo de 2025
Sáb 03 de Mayo de 2025
Dom 04 de Mayo de 2025
Lun 05 de Mayo de 2025
Mar 06 de Mayo de 2025
Mié 07 de Mayo de 2025
Jue 08 de Mayo de 2025
Vie 09 de Mayo de 2025
Sáb 10 de Mayo de 2025
Dom 11 de Mayo de 2025
Lun 12 de Mayo de 2025
Mar 13 de Mayo de 2025
Mié 14 de Mayo de 2025
Jue 15 de Mayo de 2025
Vie 16 de Mayo de 2025
Sáb 17 de Mayo de 2025
Dom 18 de Mayo de 2025
Lun 19 de Mayo de 2025
Mar 20 de Mayo de 2025
Mié 21 de Mayo de 2025
Jue 22 de Mayo de 2025
Vie 23 de Mayo de 2025
Sáb 24 de Mayo de 2025
Dom 25 de Mayo de 2025
Lun 26 de Mayo de 2025
Mar 27 de Mayo de 2025
Mié 28 de Mayo de 2025
Jue 29 de Mayo de 2025
Vie 30 de Mayo de 2025
Sáb 31 de Mayo de 2025
Dom 01 de Mayo de 2025

Publicidad

Lo más leído »

Publicidad

Más Secciones »

Hola Invitado