Proper storage conditions of pharmaceutics are of key importance to wholesalers in the supply chain of medicinal products between producer and retail. Computational fluid dynamics (CFD) uncovers an untapped potential within indoor temperature mapping validation of pharmaceutical warehouse facilities, as these are subject to strict governmental requirements, usually fulfilled by means of time-consuming and expensive on-site measurements.
 
Join us for this live webinar to learn more about CFD environment modeling for pharmaceutical storage.
 
Pharmaceutical warehouse requirements
 
During construction of such a pharmaceutical warehouse facility in Denmark, Aerotak assisted in the process by mapping temperatures throughout the warehouse using Simcenter CFD solutions.
 
A CFD model was set up in Simcenter STAR-CCM+ and validated against temperature measurements carried out in the warehouse facility in empty conditions. The CFD model was able to capture air flow and temperature distribution in the highly stratified indoor environment to within 8% of measured values. The validated model was used to predict the temperature distribution throughout the warehouse in filled conditions, identifying local cold and hot spots that would be critical to the shelf life of the pharmaceuticals.
 
The value of CFD indoor environment modelling
 
Comparing predictions for empty and filled warehouse conditions, reduced air circulation is apparent for the filled warehouse, leading to lower temperatures near the floor of the warehouse. Based on the numerical findings and reporting for the filled warehouse condition, the proposed ventilation system was found to comply with the legislative criteria and was subsequently approved by the authorities at significant time and cost reductions for the client compared to a conventional experimental approach.
 
The role of computational fluid dynamics in indoor environmental modelling
 
Register now to attend and learn more about:
 
- The value of CFD-powered temperature mapping
- How to adopt the best practices of computational fluid dynamics in indoor environmental modeling
- Use case examples from various industries
 
Meet the speakers
 
Thomas Filholm:AEROTAK Managing Partner & Senior Fluid Mechanics Specialist
 
Frederik Zafiryadis AEROTAK Fluid mechanics specialist
 
Christofer Wanner SIEMENS DIGITAL INDUSTRIES SOFTWARE:Portfolio Development Executive
 

Hora

17:00 - 18:00 hs GMT+1

Organizador

Compartir
Enviar a un amigo
Mi email *
Email destinatario *
Comentario *
Repite estos números *
Control de seguridad
Junio / 2025 359 webinars
Lunes
Martes
Miércoles
Jueves
Viernes
Sábado
Domingo
Lun 26 de Junio de 2025
Mar 27 de Junio de 2025
Mié 28 de Junio de 2025
Jue 29 de Junio de 2025
Vie 30 de Junio de 2025
Sáb 31 de Junio de 2025
Dom 01 de Junio de 2025
Lun 02 de Junio de 2025
Mar 03 de Junio de 2025
Mié 04 de Junio de 2025
Jue 05 de Junio de 2025
Vie 06 de Junio de 2025
Sáb 07 de Junio de 2025
Dom 08 de Junio de 2025
Lun 09 de Junio de 2025
Mar 10 de Junio de 2025
Mié 11 de Junio de 2025
Jue 12 de Junio de 2025
Vie 13 de Junio de 2025
Sáb 14 de Junio de 2025
Dom 15 de Junio de 2025
Lun 16 de Junio de 2025
Mar 17 de Junio de 2025
Mié 18 de Junio de 2025
Jue 19 de Junio de 2025
Vie 20 de Junio de 2025
Sáb 21 de Junio de 2025
Dom 22 de Junio de 2025
Lun 23 de Junio de 2025
Mar 24 de Junio de 2025
Mié 25 de Junio de 2025
Jue 26 de Junio de 2025
Vie 27 de Junio de 2025
Sáb 28 de Junio de 2025
Dom 29 de Junio de 2025
Lun 30 de Junio de 2025
Mar 01 de Junio de 2025
Mié 02 de Junio de 2025
Jue 03 de Junio de 2025
Vie 04 de Junio de 2025
Sáb 05 de Junio de 2025
Dom 06 de Junio de 2025

Publicidad

Lo más leído »

Publicidad

Más Secciones »

Hola Invitado