Proper storage conditions of pharmaceutics are of key importance to wholesalers in the supply chain of medicinal products between producer and retail. Computational fluid dynamics (CFD) uncovers an untapped potential within indoor temperature mapping validation of pharmaceutical warehouse facilities, as these are subject to strict governmental requirements, usually fulfilled by means of time-consuming and expensive on-site measurements.
 
Join us for this live webinar to learn more about CFD environment modeling for pharmaceutical storage.
 
Pharmaceutical warehouse requirements
 
During construction of such a pharmaceutical warehouse facility in Denmark, Aerotak assisted in the process by mapping temperatures throughout the warehouse using Simcenter CFD solutions.
 
A CFD model was set up in Simcenter STAR-CCM+ and validated against temperature measurements carried out in the warehouse facility in empty conditions. The CFD model was able to capture air flow and temperature distribution in the highly stratified indoor environment to within 8% of measured values. The validated model was used to predict the temperature distribution throughout the warehouse in filled conditions, identifying local cold and hot spots that would be critical to the shelf life of the pharmaceuticals.
 
The value of CFD indoor environment modelling
 
Comparing predictions for empty and filled warehouse conditions, reduced air circulation is apparent for the filled warehouse, leading to lower temperatures near the floor of the warehouse. Based on the numerical findings and reporting for the filled warehouse condition, the proposed ventilation system was found to comply with the legislative criteria and was subsequently approved by the authorities at significant time and cost reductions for the client compared to a conventional experimental approach.
 
The role of computational fluid dynamics in indoor environmental modelling
Register now to attend and learn more about:
 
- The value of CFD-powered temperature mapping
- How to adopt the best practices of computational fluid dynamics in indoor environmental modeling
- Use case examples from various industries
 
Meet the speakers
 
Thomas Filholm:AEROTAK
Managing Partner & Senior Fluid Mechanics Specialist
 
Frederik Zafiryadis:AEROTAK
Fluid mechanics specialist
 
Christofer Wanner:SIEMENS DIGITAL INDUSTRIES SOFTWARE
Portfolio Development Executive

Hora

11:00 - 12:00 hs GMT+1

Organizador

Compartir
Enviar a un amigo
Mi email *
Email destinatario *
Comentario *
Repite estos números *
Control de seguridad
Noviembre / 2025 259 webinars
Lunes
Martes
Miércoles
Jueves
Viernes
Sábado
Domingo
Lun 27 de Noviembre de 2025
Mar 28 de Noviembre de 2025
Mié 29 de Noviembre de 2025
Jue 30 de Noviembre de 2025
Vie 31 de Noviembre de 2025
Sáb 01 de Noviembre de 2025
Dom 02 de Noviembre de 2025
Lun 03 de Noviembre de 2025
Mar 04 de Noviembre de 2025
Mié 05 de Noviembre de 2025
Jue 06 de Noviembre de 2025
Vie 07 de Noviembre de 2025
Sáb 08 de Noviembre de 2025
Dom 09 de Noviembre de 2025
Lun 10 de Noviembre de 2025
Mar 11 de Noviembre de 2025
Mié 12 de Noviembre de 2025
Jue 13 de Noviembre de 2025
Vie 14 de Noviembre de 2025
Sáb 15 de Noviembre de 2025
Dom 16 de Noviembre de 2025
Lun 17 de Noviembre de 2025
Mar 18 de Noviembre de 2025
Mié 19 de Noviembre de 2025
Jue 20 de Noviembre de 2025
Vie 21 de Noviembre de 2025
Sáb 22 de Noviembre de 2025
Dom 23 de Noviembre de 2025
Lun 24 de Noviembre de 2025
Mar 25 de Noviembre de 2025
Mié 26 de Noviembre de 2025
Jue 27 de Noviembre de 2025
Vie 28 de Noviembre de 2025
Sáb 29 de Noviembre de 2025
Dom 30 de Noviembre de 2025

Publicidad

Lo más leído »

Publicidad

Más Secciones »

Hola Invitado